Saw Machine Operator – Days

Posted August 11, 2026 | Team - Fabrication | Supervisor - Operations Manager | Back to Listings

This position will utilize a saw machine to cut parts as directed. Make marks on material for cutting and guide material through saw cuts.

Cut material on table by placing on a table manually or using an overhead hoist.
Position and secure material on saw machine to guide material against saw.
Turn controls to set cutting speed, feed rate, blade tension, and to adjust tilt of blade on table.
Measure material to mark for cuts and to verify accuracy of cuts using tape measures, calipers and, other measuring devices.
Maintain equipment for proper machine operation.
Install or adjust specified saw blades in machine using hand tools.
Sharpen blades or replace defective or work blades.
Check way-lube, hydraulic oil, grease, and oil levels on the machine.
Locate material to correct bin location, record material on cut list.
Move excess material to an appropriate bin location.
Spot check inventory counts.
Empty machine shop chip hopper as needed.
Perform all other duties as assigned.

Must be 18 years of age or older
Must be able to read and write (in English) and perform basic mathematical calculations
Ability to concentrate on a task without being distracted.
Must demonstrate the ability to read a tape measure and have a basic understanding of fractions and decimals.
Must possess the ability, or have the ability to learn how, to read a blueprint, micrometer, and calipers
Must be willing to work additional hours as production demands increase
Must have strong organizational skills and be self-motivated
Must possess, or have the ability to develop, knowledge of products manufactured

Frequently involves heavy lifting, pulling (up to 80 pounds), bending, stooping, kneeling, climbing ladders, subject to dust, dirt, grease, and noise conditions
Frequent Standing 90% of day, Walking 20% of day.
Exposed to moderate burns and flying objects.